Save Money Do It your-self

Located inside or outside of your home is a circuit breaker panel (sometimes called a fuse box) that contains circuit breakers for each of the circuits in your home. Some homes have more than one circuit breaker panel, there may be a main panel plus one or more sub panels in other locations.

Caution: Please read our safety information before attempting any testing or repairs.

A circuit breaker provides protection for each of your electrical circuits by stopping the flow of current if an overload or fault occurs. When an electrical fault occurs or the load on your circuit becomes too great, the breaker on that circuit trips and interrupts the flow of current to that circuit. A tripped circuit breaker is still sometimes referred to as a “blown fuse” in reference to the older technology that circuit breakers replaced. If your home uses an actual fuse and not a circuit breaker, click here for information on fuse boxes.

Instructions To Reset a Circuit Breaker

Before electricity can be restored, the circuit breaker must be reset. However, even before you do that, you must take steps to ensure that it is safe to do so. Turn off or unplug all of the devices that are plugged into the circuit. Make certain no dangerous condition exists before restoring power.

Electricity should now be restored to the circuit. If the circuit breaker trips again before you have turned anything on or plugged anything in, the breaker itself may need to be replaced or a serious wiring fault may exist. Immediately consult a qualified electrician.

If the circuit breaker trips after plugging in or turning on a device, that device may have a short or may be placing too much of a load on the circuit.

If no circuit breakers were tripped and you still do not have power at an outlet, there may be a wiring fault, the outlet may be defective or it may be on a GFCI controlled branch circuit. Refer to the guide for checking a GFI Breaker.